Sp Flash Tool Stuck At Download _hot_ Da 100 Jun 2026

If your device has a removable battery, take it out, wait 10 seconds, put it back in, and try again without turning the phone on. 💻 Fix 1: Update Your VCOM Drivers

Old versions of SP Flash Tool (v5.x) cannot handle new security features like or SLA/DAA (Secure Layer Authentication/Debug Authentication Authorization) found in Android 9, 10, 11, 12, and 13. If you use a legacy tool on a new phone, it will hang at 100% every time.

: A faulty USB cable, loose port, or insufficient power from the PC's USB port can halt the process.

Using a version that is too old or too new for your phone’s firmware. Step-by-Step Fixes for SP Flash Tool DA 100% Issue sp flash tool stuck at download da 100

How you connect your phone to the PC changes the boot mode. Connecting it incorrectly causes the device to drop the VCOM connection right after the DA loads.

The latest version of SP Flash Tool (v5.x or v6.x) isn't always the best for older phones. Newer tools often have incompatible Download Agents.

If it doesn't start, reinsert the battery after connecting the USB cable, or try holding the or Volume Up button while connecting. 6. Use "Download Only" Instead of "Firmware Upgrade" If your device has a removable battery, take

: Power off the device completely and try holding the Volume Up , Volume Down , or both buttons while plugging it into the PC to force it into the correct boot mode.

: Avoid blue USB 3.0 or Type-C ports on your PC motherboard; they frequently drop MTK preloader connections. Plug directly into the back of the PC if using a desktop. Swap the Cable : Use a high-quality, short OEM data cable.

Download a custom DA file specific to your phone model or chipset (e.g., MT6765, MT6739). Open . : A faulty USB cable, loose port, or

The default DA file included with SP Flash Tool cannot handle every MTK chip, especially newer or highly customized devices (like those from Xiaomi, Oppo, Vivo, or Infinix).

The SP Flash Tool is a popular software used to flash firmware on Android devices, particularly those powered by MediaTek (MTK) chipsets. However, some users encounter issues while using the tool, such as getting stuck at 100% during the download DA (Download Agent) process. If you're facing a similar problem, you're in the right place. In this article, we'll explore the causes of the issue and provide step-by-step solutions to help you resolve it.

Work through these solutions in order, from the easiest software tweaks to more advanced bypass methods. 1. Change or Update the Download Agent (DA) File

Think of the DA as a small, temporary operating system that the SP Flash Tool uploads to your phone’s RAM. Its job is to take over from the phone's boot ROM and handle the actual writing of data (system, boot, recovery) to the flash memory.