Rk Android Tool V135 ((install)) Jun 2026

Monitor the log window on the right side of the screen. You will see progress bars indicating data transfer.

Right-click on RKAndroidTool.exe and select .

Open the extracted folder and right-click RKAndroidTool.exe , then select .

Windows XP, Windows 7, Windows 8, or Windows 10/11 (32-bit or 64-bit).

Flashing low-level partitions on any Android device carries inherent risks. Installing an incorrect bootloader or modifying partition offsets with the wrong parameter file can result in a hard brick, rendering the motherboard useless. Always ensure that the firmware files match your device's motherboard revision model exactly before clicking run. rk android tool v135

: Disconnect the power and use a high-quality USB OTG cable to connect the device to your PC. The Trigger : Hold down the physical button (often hidden inside a pinhole) on the device. The Handshake

The tool will only write data if the device is in or Loader mode. Power off the device completely. Hold down the Volume Up or Recovery pinhole button. Insert the USB cable into the PC while holding the button.

While v1.35 is a classic tool for older Rockchip devices, the company's official tool has evolved. The successor, , is essentially the modern version of the same application, supporting newer chips like the RK3399, RK3566, and RK3588. It offers an updated interface and broader compatibility with contemporary Windows operating systems.

Click the button (or EraseIDB first if you are performing a completely clean wipe of corrupted storage). Monitor the log window on the right side of the screen

Flashing firmware is risky. Using version 1.35 on a modern Rockchip processor (like the RK3399 or RK3588) may result in a permanent hardware failure. Always verify that your specific device model recommends version 1.35 before proceeding.

It's common for the tool to fail to detect your device. Here are some solutions based on community knowledge:

The drivers are missing, or the device is not in Loader Mode.

Before using RK Android Tool v1.35, you must set up the correct USB drivers on your Windows PC (Windows XP, 7, 8, and 10 are supported; 11 may require compatibility settings). Open the extracted folder and right-click RKAndroidTool

Connect via a reliable USB data cable to prevent connection drops.

Click the empty path fields next to the partition components (Loader, Parameter, Boot, Kernel, System).

Upload individual image files (like boot.img , recovery.img , or system.img ) without rewriting the entire firmware.