|
|
: If you're running Windows 10 or later, you can enable WSL and install a Linux distribution from the Microsoft Store. After setting up WSL, you can install sunxi-tools within the Linux environment.
This is a critical USB driver installation tool used to replace the default Windows driver with one that sunxi-tools can talk to (typically WinUSB or libusb-win32 ).
to his PC via USB. To make the computer "see" the board, he had to trigger He held down the special U-Boot button He tapped the Reset button
This command reads the Secure ID of the device. If it returns a long hex string, your connection is successful. sunxi-fel.exe spl Use code with caution. Boot a Kernel directly via USB: sunxi-fel.exe uboot Use code with caution. Flash a complete image (e.g., to MMC): sunxi-fel.exe -p spiflash write 0 Use code with caution. Troubleshooting sunxi-tools windows
The Windows port typically bundles the most critical utilities from the linux-sunxi/sunxi-tools repository:
If you want the absolute latest features or need to compile the tools from the official source repository, MSYS2 provides a clean environment. Download and install . Open the MSYS2 MinGW 64-bit terminal.
Open Command Prompt (CMD) or PowerShell in the folder containing sunxi-fel.exe . Run: : If you're running Windows 10 or later,
If you are planning to build custom images or modify your device's low-level configuration, let me know:
Once your drivers and tools are configured, you can test your environment with these standard operations: 1. Verifying Connection Open Command Prompt and check if your device is detected: sunxi-fel.exe version Use code with caution.
: Always ensure no SD card or SPI flash is interfering with the boot process if you are trying to force FEL mode. to his PC via USB
You will need Zadig, a tool for installing USB drivers on Windows.
Download a trusted Windows port of sunxi-tools (often found on GitHub releases or community forums). Extract the ZIP file to a folder, such as C:\sunxi-tools .
There is no "official" Windows installer, so users typically choose one of three paths: 1. Using Pre-Compiled Binaries
Writing firmware images directly to NAND or EMMC via USB. Unbricking: Recovering devices that will no longer boot. FEL Booting: Booting U-Boot directly into RAM via USB. Extracting Info: Reading device memory and configuration. Prerequisites: Preparing Windows for Sunxi-tools
is a collection of open-source command-line utilities designed to interface with Allwinner SoC (System on Chip) devices, and while natively built for Linux, it can be fully compiled and executed on Windows using environments like MSYS2 or WSL.