Go to and tap Build Number 7 times to enable Developer Options.
Copy the file and the GApps zip file directly onto your phone's internal storage or MicroSD card. Step 4: Wipe the Existing System
The tool will parse the file and populate a list of checkboxes below (PRELOADER, BOOT, SYSTEM, etc.). Step 4: Choose the Correct Flash Mode
Watch the bottom bar of SP Flash Tool. It should turn (detecting device), then Yellow (flashing progress bar). You can release the volume button once the yellow bar starts filling up.
If you cannot find a dedicated port, you can try a . Since MT6580 is 32-bit & A-only, you need specific GSIs.
was designed for 64-bit ARMv8-A or newer. While Google does support 32-bit in AOSP, the main obstacles are:
Check the boxes for , System , Cache , and Data . Slide the bar at the bottom to wipe the system clean.
Flashing firmware carries inherent risks. Modifying your device's operating system can permanently brick the hardware if instructions are followed incorrectly. Proceed with caution. Device and System Requirements
: If the phone gets stuck on the logo, enter Recovery Mode (usually Power + Volume Up) and perform a "Factory Reset" or "Wipe Data".
: Look for a GSI (Generic System Image) or a device-specific ROM on forums like XDA Developers .