Canon+service+tool+v4718+updated -

In the tool interface, verify that the printer is connected. Under , select "Main" and click "Set" .

Sets the main and platen ink absorber counters to 0%.

: Instantly clears the 5B00, 5B01, and 1700 absorber errors.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. canon+service+tool+v4718+updated

the printer, but leave the power cable plugged into the wall.

The requested function is not supported by your printer variant.

If your printer exhibits any of the following technical warnings, the V4718 updated tool is required: In the tool interface, verify that the printer is connected

: MG3500 series, MG3600 series, and some MG5000/6000 models (depending on the specific firmware version). Professional Series : Pro-500 and Pro-1000. How to Use Canon Service Tool v4718

| Use V4718 if… | Stick to older version if… | |---------------|----------------------------| | You have a newer TS/TR series printer | Your old V3400/V4400 already works | | Your printer shows error 5B00 after a firmware update | You are comfortable with EEPROM resets on an older model | | Windows 11 doesn’t recognize your older service tool | You don’t need to change region settings |

The Canon Service Tool if your printer is turned on normally. You must manually boot the hardware into Service Mode first. Follow these steps carefully: : Instantly clears the 5B00, 5B01, and 1700 absorber errors

: The printer mechanism will move briefly, print a single page containing technical alignment lines, and display a dialog pop-up box stating: "A function was completed successfully."

This is where caution is paramount. Any download comes from third-party websites, file-sharing platforms, or repair forums. Consequently, many downloads are bundled with adware, trojans, or false positives.

: You must have at least one sheet of plain paper loaded in the tray to print the confirmation (EEPROM) report after the reset.

Resets the main and platen waste ink absorber counters back to 0%.