Chevron Digital Timer Ew-32 User Manual __full__ Site

Press and hold the button for 3 seconds to toggle between standard 12-hour formatting and 24-hour formatting. The "AM" or "PM" indicator will appear in the 12-hour format. Activating Daylight Saving Time (DST)

To set the internal clock, you must hold the button while pressing the following: WEEK: Set the current day (e.g., MO, TU, WE).

While in mode:

The Chevron EW-32 supports multiple independent programs. Each program requires an (when the device turns on) and an OFF time (when the device turns off). Step-by-Step Programming: chevron digital timer ew-32 user manual

: While holding CLOCK , press the HOUR button to reach the current hour. Pay close attention to the AM/PM indicators on the screen.

The EW-32 supports up to per day:

repeatedly until the correct day of the week appears at the top of the screen. Press and hold the button for 3 seconds

Overrides programs or reinstates a program that was previously cleared during setup.

To clear a specific program slot, press PROG to navigate to that slot and press the RES/RCL (Reset/Recall) button. The time field will change to dashes ( --:-- ), indicating the program is blanked out. 5. Understanding the Manual Override Modes

The Chevron EW-32 features a built-in rechargeable battery that saves your programmed schedules if the power goes out. While in mode: The Chevron EW-32 supports multiple

More advanced digital timers allow you to set up to 20 different "On" and "Off" events. You would repeat the above steps for each new program, and you may have additional buttons for selecting which days of the week a specific program should be active (e.g., weekdays only, weekends only).

The instructions below are synthesized from available resources and general digital timer programming logic. They cover the most common functions of the Chevron EW-32.