Because the pad in the L382 is quite large and rarely actually overflows within the counter’s lifetime, many users safely reset the counter without replacing the pad. If the pad truly is saturated, resetting without changing it can lead to ink leaking inside the printer, causing damage or a mess.
A: You may have a secondary error. Check "Ink Cartridge Recognition" or "Paper Jam" flags in the Adjustment Program. Also, try a "Initial Ink Charge" in the service tool.
Locate the small rubber tube that feeds ink into the waste pads from the back of the printer.
The power light and the red ink/paper lights on the printer console will flash alternately. epson l382 waste ink pad reset
: Check the box for Main Pad Counter and click Check . The software will show a percentage; if it is at 100%, the reset is necessary.
– Turn the printer off manually, wait 10 seconds, and turn it back on to normal mode. The error should be gone.
Epson L382 "Service Required" error occurs when the internal waste ink pad counter reaches its limit, typically indicated by flashing red ink and paper lights. You can resolve this by resetting the software counter or physically servicing the pads. Methods to Reset the Waste Ink Counter Because the pad in the L382 is quite
The author is not responsible for bricked printers. Resetting the counter does not damage hardware; spilling ink because you ignored a full pad does .
These video tutorials provide visual guidance on using different software tools to reset the waste ink pad counter on your Epson L382:
Remove the single screw holding the panel in place and slide the panel off. Check "Ink Cartridge Recognition" or "Paper Jam" flags
Resetting the software counter does physically clean the ink pad. If the pad is actually full of ink, it may eventually overflow and damage your desk or the printer's internal components. Consider replacing the physical waste ink pad or installing an external waste ink bottle for a long-term fix. How to Reset Ink Pad Epson L382, Epson L386 Printer?
Open the extracted folder, right-click on the AdjProg.exe file, and select Run as administrator .
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.