* [Admin Code] # → 7 → [Scan Card or enter Card ID] → # * [Admin Code] # → 2 → [00–99 seconds] → # Delete All Cards * [Admin Code] # → 86 (on specific YH/V models) Wiring Instructions Ensure power is disconnected before wiring to avoid damage. Red: +12VDC Power Supply. Black: GND (Negative).
Let me know which you are currently working on! RFID Programming Guide
The LED (typically green) will flash to indicate you are in programming mode. Setting Access Modes : Press 40# . Card and Password : Press 41# . Password Only : Press 42# . Door Settings
If you have lost your physical copy, do not rely on random file-sharing sites. Follow these safe steps:
If your device isn't one of those three, the "V2000-C" model number may appear on other types of equipment. Here is a quick guide to identifying them:
Manuals for this device are available from specialized industrial and security manual databases. You can find the and the "V2000C Door Access Manual" by searching for these specific terms on websites like Manualmachine.com or Manualslib.com . If your system is part of a larger building security network, you should also consult the documentation for your specific HID or TURGOT controller model.
Press [#] to clear data entry errors. 2. Security Customization
| Setting | Recommended Value | Why | |---------|------------------|-----| | Loop Recording | 3 minutes | Balances file size & ease of finding clips | | G-Sensor | Medium or High | Locks video when bump detected | | Parking Mode | On (if hardwired) | Records while parked | | Exposure | +0.0 or +1/3 | Adjust if night video is too dark | | WDR / HDR | On | Improves low-light quality | | Stamp | Date + time + speed (optional) | Useful as evidence | | Frequency | 60Hz (US) / 50Hz (EU) | Prevents light flicker |
Before performing any structural modifications or wiring configurations, confirm your hardware meets the manufacturer parameters outlined in the Goldbridge V2000-C Product Sheet :
Enter programming mode, press [3] , enter the specific [4-digit User Number] you wish to remove, and listen for the confirmation tone.
is a popular, standalone RFID access control keypad often used for securing office doors, residential gates, and restricted storage areas. This blog post breaks down the essential steps from the V2000-C user manual to help you get your system up and running.
V2000-c User Manual Repack Today
* [Admin Code] # → 7 → [Scan Card or enter Card ID] → # * [Admin Code] # → 2 → [00–99 seconds] → # Delete All Cards * [Admin Code] # → 86 (on specific YH/V models) Wiring Instructions Ensure power is disconnected before wiring to avoid damage. Red: +12VDC Power Supply. Black: GND (Negative).
Let me know which you are currently working on! RFID Programming Guide
The LED (typically green) will flash to indicate you are in programming mode. Setting Access Modes : Press 40# . Card and Password : Press 41# . Password Only : Press 42# . Door Settings v2000-c user manual
If you have lost your physical copy, do not rely on random file-sharing sites. Follow these safe steps:
If your device isn't one of those three, the "V2000-C" model number may appear on other types of equipment. Here is a quick guide to identifying them: * [Admin Code] # → 7 → [Scan
Manuals for this device are available from specialized industrial and security manual databases. You can find the and the "V2000C Door Access Manual" by searching for these specific terms on websites like Manualmachine.com or Manualslib.com . If your system is part of a larger building security network, you should also consult the documentation for your specific HID or TURGOT controller model.
Press [#] to clear data entry errors. 2. Security Customization Let me know which you are currently working on
| Setting | Recommended Value | Why | |---------|------------------|-----| | Loop Recording | 3 minutes | Balances file size & ease of finding clips | | G-Sensor | Medium or High | Locks video when bump detected | | Parking Mode | On (if hardwired) | Records while parked | | Exposure | +0.0 or +1/3 | Adjust if night video is too dark | | WDR / HDR | On | Improves low-light quality | | Stamp | Date + time + speed (optional) | Useful as evidence | | Frequency | 60Hz (US) / 50Hz (EU) | Prevents light flicker |
Before performing any structural modifications or wiring configurations, confirm your hardware meets the manufacturer parameters outlined in the Goldbridge V2000-C Product Sheet :
Enter programming mode, press [3] , enter the specific [4-digit User Number] you wish to remove, and listen for the confirmation tone.
is a popular, standalone RFID access control keypad often used for securing office doors, residential gates, and restricted storage areas. This blog post breaks down the essential steps from the V2000-C user manual to help you get your system up and running.