A firmware file intended to fix "Hang on Logo" issues for the TA-1352 is available via this YouTube guide's description Database Search:
Flashing the Nokia TA-1352 PAC file is typically required for:
If you have obtained the PAC file from a reputable firmware repository, follow these steps:
Flashing firmware carries risks. To prevent permanently damaging (hard-bricking) your Nokia TA-1352, complete these preparatory steps: nokia ta1352 pac file link
Unplugging the device mid-flash will hard-brick your phone. Step 6: Finalizing the Flash
Hold (or sometimes Volume Up + Down) and connect the USB cable to the PC.
(System, Vendor, and Product images). Recovery partitions for factory resets. Modem and radio files for cellular connectivity. Why Do You Need the Nokia TA-1352 PAC File? A firmware file intended to fix "Hang on
This PAC file contains the absolute essential partitions required by the device to boot, including: (FDL1, FDL2) System image (Operating system files) Userdata (Factory default applications and settings) Recovery image (Stock Android recovery environment) Prerequisites Before Flashing
Unplug the phone, hold the Volume Up + Power keys to enter recovery mode, and perform a factory reset / wipe data cache. Then, reboot the system normally.
If your PC doesn't recognize the phone, double-check your SPD/Unisoc drivers in the Device Manager. (System, Vendor, and Product images)
Removing forgotten lock patterns or PINs.
The of the device (e.g., completely dead, stuck on logo). Share public link
Once the operation successfully finishes, the progress bar will turn green and display a or Finish status message.
Click the (the arrow button) in the SPD Upgrade Tool. This puts the tool in standby mode, waiting for the device to connect. Step 6: Connect the Device