Centurion Cs 2000 Power Converter Manual Wiring Diagram Review

If you leave the RV plugged into shore power for weeks at a time, the CS 2000 will continuously apply roughly 13.6V to 14.0V to the battery.

If you choose to keep your original Centurion CS2000 in service, follow these maintenance practices:

The physical transformer laminations or the unit housing may be vibrating against the camper cabinetry. Tighten all mounting hardware.

[Shore Power Source] --> [Main Breaker] --> [Centurion AC Input Block] (Note: The AC ground and DC negative must be separated; the DC negative is bonded to the chassis ground separately from the AC ground per RV safety standards.) centurion cs 2000 power converter manual wiring diagram

| Replacement Model | Key Features | Why It's a Good Choice | | :--- | :--- | :--- | | | 25 amps DC output, 3-stage smart charger | Nearly identical replacement for the CS2000 series with modern charging | | WFCO 8735 | 35 amps DC output, 3-stage smart charger | More capacity, includes a cooling fan and extra fuse slots, $10 more than WF-8725 | | Progressive Dynamics PD4135 | 35 amps DC output, 4-stage charging (Boost, Normal, Storage, Desulfation) | Superior multi-stage charging; sometimes requires modifications to fit the Centurion mounting box | | Boondocker 1245-PC | 45 amps DC output, multi-stage charging | Replacement for larger 45-amp Centurion models with modern charging profiles | | Boondocker 1260-PC | 60 amps DC output, multi-stage charging | Replacement for the 60-amp Centurion 6000 series | | Centurion Replacement Board | Fits original box, multi-stage charging | Option for those wanting to keep original housing, $119.50 |

This is the filtered, hot 12V DC output coming straight out of the transformer/rectifier circuit. It supplies positive current directly to the positive side of your RV's 12V automotive fuse panel.

Connect the heavy-gauge from the converter to the RV's central negative ground block or directly to the metal frame/chassis. If you leave the RV plugged into shore

Look at the fuse block on the front of the CS 2000. There is usually a dedicated fuse to protect the unit if the battery was ever hooked up backward. If blown, replace it with an identical amperage fuse.

Place the unit in a well-ventilated area near the battery, away from direct heat or moisture. Ensure enough space for the cooling fan to operate.

Route the main 30A shore power line into the back of the converter casing using an approved strain-relief connector. Connect the wire to the ground bus bar. Connect the White Neutral wire to the neutral bus bar. [Shore Power Source] --> [Main Breaker] --> [Centurion

Screwdrivers (Square/Robertson #2 is common in RVs, along with standard Phillips)

A complete distribution center that fits similar physical cutouts and offers smart charging profiles.