Reset Epson L3252 — ((top))

Epson printers have a service life based on a sponge (waste ink pad) inside the machine that absorbs ink from cleaning cycles. When the counter reaches 100%, the printer locks permanently and displays a “Service Required” error.

There are two primary avenues for resetting the L3252: the official Epson service route and the third-party utility route.

Just remember to combine any digital reset with physical care for your machine. A reset alone does not fix a full waste ink pad—only cleaning or replacing the pad does. By following the steps in this guide and performing regular maintenance, you can keep your Epson L3252 running smoothly for thousands of pages to come. If at any point you feel uncomfortable with a procedure, especially opening the printer to access the waste pads, it is always wise to consult a professional repair technician.

(for some models): Press "Stop" + "Power" together for 3 sec while printer is on. reset epson l3252

If you are having trouble with ink recognition, you can sometimes reset the chips manually by holding a small button above the chip with a paper clip for 10 seconds. Physical Maintenance:

You must reconfigure the Wi-Fi using the Epson Smart Panel app on your phone or via a USB connection to a computer.

Press and hold the button and the Power button simultaneously. Epson printers have a service life based on

Press and hold the and Wi-Fi buttons simultaneously. While holding them, press the Power button.

Keep the boxes for Main pad counter and Platen pad counter checked. Click the Initialize button.

As mentioned in Part 6, this is the ultimate solution. Once you route waste ink to an external bottle, you can reset the counter infinite times with no risk. Search YouTube for “Epson L3252 waste ink bottle mod” for visual instructions. Just remember to combine any digital reset with

Resetting the software counter tells the printer that the waste ink pads are completely empty. However,

The printer refuses to execute any print, scan, or copy commands despite being connected and powered on.

If you reset the counter multiple times without addressing the physical pads, ink will eventually overflow out of the bottom of the printer casing.

This is needed when the printer shows:

Plug the power cord directly into a wall outlet (avoid using surge protectors or extension cords during a reset). Turn the printer back on. Method 3: Resetting the Network / Wi-Fi Settings